Are you frustrated because your Dyson vacuum won’t charge when you plug it in? Don’t worry; you aren’t the only one. Many things can cause charging problems for Dyson vacuum owners. We are giving you a great solution at vacuumera.com
The following article will look at the possible causes of this problem and give expert advice, useful fixing tips, and other helpful information to get your Hoover to charge again. Follow our guides to learn more about the Dyson vacuum charging system.
So, let’s dive in here.
Dyson Vacuum Won’t Charge When Plugged In? Here Are 6 Possible Causes & Fixes
6 Reasons & Solutions Dyson Vacuum Not Charging When Plugged In
It could be for many reasons that you have trouble charging your Dyson cleaner.
Here are a few of the most popular offenders:
Faulty Charging Cable
A lousy charging cord is one of the main reasons why charging doesn’t work. Cables can wear out over time if bent, pulled, or left out in challenging circumstances. It could be harder to charge if the cord is broken or torn.
Check the charging cord for any damage or wear that you can see. If you find any problems, replace it with an actual Dyson wire.
Dust and Debris in Charging Ports
Dust, dirt, and other debris can get into the charging ports of your Dyson vacuum. It makes it hard to connect to the charging dock.
Clean the charging ports carefully with a soft brush or compressed air to remove debris. It could stop the charging process from working.
If the battery in your Dyson vacuum is old or broken, it might not charge properly. Batteries only last for a while; they can lose their ability to hold a charge well after much use.
Check how old and good the battery is. If it’s old or doesn’t work right, you should get a new one from Dyson.
Problems with the outlets
What should I do if none of the troubleshooting steps work to fix the charging problem with my Dyson vacuum? Sometimes, the trouble might be with something other than your Dyson cleaner but with the power port. A broken plug or a failed circuit breaker can stop your Hoover from charging.
Try putting your Dyson vacuum into a different power outlet to see if that fixes the problem. Also, make sure the power breaker in your home is still working.
Charging Dock Problems
If your Dyson vacuum doesn’t charge when put in, the charging dock may not work correctly. If the internal parts of the charging dock are broken, it won’t be able to send power to the Hoover.
Check the charging dock for any signs of damage or your Dyson Vacuum head not open, and broken connections. If you need to, call Dyson to help get the charging dock fixed or replaced.
Software bugs or problems with the software of the Hoover can sometimes stop it from charging.
Check to see if there are any version changes for your Dyson vacuum. Follow Dyson’s directions to update the software.
The 6 Troubleshooting Steps to Resolve Charging Problems are Revealed
6 Troubleshooting Steps to Fix Charging Issues
We’ve discussed why your Dyson vacuum might not charge when plugged in. Let’s go over some steps to fix the problem:
Reset the Vacuum
- Restarting your Dyson vacuum will clear up any problems or mistakes.
- Stop the Hoover from running and unplug it from the charger.
- Hold the power button down for a Minimum of Ten Seconds.
- Turn off the Hoover and plug it back into the charger.
- Turn the Hoover on and see if it begins to charge.
Check the cord for charging
Check the charging cord for frayed wires or bent pins.
Replace the broken cord with a new Dyson one, if necessary.
Ensure the cord is tightly connected to the Hoover and the power source.
Clean Charging Ports
- Remove dust or dirt from your Dyson vacuum’s charge ports by carefully cleaning them.
- Clean the charging ports gently with a soft brush or compressed air.
- Don’t use anything sharp that could hurt the ports.
Verify the Power Outlet
- Make sure the power source you’re using works properly.
- Plug in another electronic device to see if the electrical outlet is getting power.
- Use a different plug to charge your Hoover if the one you are using doesn’t work.
Update the Firmware
- Check to see if your Dyson vacuum has any new software changes, and if it does, run them as directed.
- Go to Dyson’s main website and look for changes to the software for your vacuum type.
- Follow the steps to change the software on the Hoover.
Contact Dyson Support
If none of the steps above work to fix the problem, it’s time to contact Dyson support for more help. They can offer more customized options or, if needed, set up fixes.
Questions Most Often Asked (FAQs)
Why Is My Dyson Vacuum Not Charging Even After Cleaning The Charging Ports?
If the problem still happens after you clean the charging ports, it could be a bad battery or charge cord. Think about changing these parts if they need to be.
Can I Use A Third-Party Charging Cable With My Dyson Vacuum?
Even though you can use a charging cable from a third party, it’s best to use a genuine Dyson repair cable to avoid connection problems and get the best charging performance.
How Long Does It Take To Charge A Dyson Vacuum Fully?
The charge time depends on the Hoover type and the battery’s size. A Dyson cleaner takes between 3 and 5 hours to fully charge.
Why Does The Battery In My Dyson Vacuum Run Out Of Power Quickly?
A fast-draining battery could mean that the battery is old.Then needs to be replaced or that the high-power settings are always used while cleaning.
Is It Normal For My Dyson Cleaner To Heat Up As It Charges?
Yes, it is normal for the Hoover to get a little warm during charging. But if it gets too hot, there might be a problem.
Can I Always Keep My Dyson Vacuum Plugged In?
Most current vacuums are safe to leave plugged in because they have safety measures to keep them from overcharging. But if you will use it briefly, it’s best to unplug it.
Having trouble charging your Dyson vacuum can be stressful. But with the right debugging and care, you can fix most problems quickly. This article discussed the most common reasons why Dyson vacuums wouldn’t charge and gave step-by-step instructions on how to fix each issue.
Before approaching Dyson support for more help:
- Check the charging cord.
- Clean the charging ports.
- Update the software.
- Ensure the power source works.
Taking care of your Dyson vacuum and fixing charging problems immediately will make it last longer.