vacuum logo

How To Connect Pool Vacuum Hose To Skimmer – Master Guide

A pool cleaner pipe is what you need to keep your pool clean. It helps clean the pool bottom by removing dirt, trash, and algae. So the water stays clean and safe to swim in. Putting the line on the skimmer is one of the most important steps in using a pool cleaner. The skimmer is a piece of equipment that helps the pool pump move water around and gives the vacuum hose a place to connect.

This guide will show you how to hook a vacuum hose to a skimmer. We’ll also talk about why connecting the hose to the skimmer is essential and give you valuable tips for fixing common problems. So, let’s start!

First, we will know the importance of connecting a pool vacuum hose to a skimmer.

Why Is It Important To Connect A Pool Vacuum Hose To A Skimmer?

Why Is It Important To Connect A Pool Vacuum Hose To A Skimmer?

Connecting (use) a pool vacuum line to a skimmer is essential for more than one reason.

  • The skimmer provides a suction point that is much stronger than the suction point of the pool pump itself. This means that the vacuum hose will be able to remove more dirt, debris, and algae from the bottom of the pool.
  • The skimmer helps to circulate water through the pool pump. This is important because it helps keep the pool water clean and free of contaminants.
  • It is simpler to clean the pool when the vacuum line is linked to the skimmer. The hose is already in the right place, so you don’t have to worry about finding a pressure point.

We now understand how crucial it is to attach a pool vacuum hose to a skimmer.  Next, we will learn how to connect a pool vacuum hose to a skimmer step by step.

How To Connect A Pool Vacuum Hose To A Skimmer Above Ground Pool ( Step By Step Know )

How To Connect A Pool Vacuum Hose To A Skimmer Above Ground Pool

Connecting a pool vacuum hose to a skimmer is a simple step if you are a professional. But If you are a beginner, follow the below steps because those steps will help you properly connect a pool vacuum hose to a skimmer.

Step 1: Gather the Necessary All Tools 

Ensure that you have all the required tools before you start vacuuming your pool.

  • Pool vacuum head: This part of the vacuum contacts the pool surface and collects debris.
  • Telescopic pole: A pole that can be adjusted in length and is used to attach the vacuum head.
  • Pool vacuum hose: A long, flexible hose that joins the skimmer with the vacuum head.
  • Skimmer basket: A removable container in the skimmer that collects debris before entering the filter system.

The vacuuming process will go more smoothly and effectively if these items are available.

Step 2: Turn off the pool pump

You must set up the pool vacuum (cleaner) before you can start cleaning. To get the vacuum ready, do the following:

  • Join the telescoping stick to the head of the vacuum.
  • Join the head of the vacuum to one end of the vacuum line.
  • Then Slowly lower the vacuum head, pole, and hose into the pool, ensuring no air holes in the line.

Now that you’ve set up the pool vacuum, you can move on to the next step.

Step 3: Remove the skimmer basket

The skimmer port is a small hole on the side of your pool that helps water flow into the skimmer basket and cleaning system. Find the port for the skimmer before going any further. It is often near the top of the pool wall and may have a cover that can be taken off.

Step 4: Place the vacuum plate in the skimmer

To connect the pool vacuum hose to the skimmer port, you may need to use a hose adapter. Check your skimmer port type and use the appropriate adapter if necessary. Attach the adapter securely to the skimmer port.

Step 5: Connect the vacuum hose to the vacuum plate

Now it’s time to connect the pool vacuum hose to the skimmer. Put one end of the hose into the port or adapter on the skimmer and push it in until it fits snugly. Ensure a tight connection to prevent any suction loss.

Step 6: Turn on the pool pump.

Before you can start vacuuming, you need to prime the pool vacuum by removing any air from the hose. To do this, follow these steps:

  • Hold the free end of the pool vacuum hose in front of one of the pool return jets. The force of the water will push out any air from the hose.
  • Once water flows steadily from the hose, it is primed and ready for vacuuming.

Now that the pool vacuum is all set up and ready for use, it’s time to start cleaning. Move slowly and carefully across the pool, crossing each way to ensure it’s clean. Pay more attention to places where you can see dirt or trash. You can move the vacuum’s head around the pool with the help of the telescoping pole.

How to Connect a Vacuum to an In-Ground Pool is a Skill We Can Master

How To Hook Up Vacuum To Inground Pool

It’s easy to set up a pool cleaner for an in-ground pool. First, make sure there is enough water in your collection. Then, put a vacuum head on the end of a long stick. Connect one end of the hose to the vacuum head and the other end to the pool’s skimmer or another vacuum port.

Please turn on the pump to create suction and move the vacuum head around the bottom of the pool to clean it. Watch the water level and make sure the skimmer basket is empty if you use it. When you’re done, please turn off the pump, disconnect everything, and clean the vacuum head and hose before putting them away.

Next, we will know what you should do if the skimmer is not working.

Why Is The Pool Skimmer Not Working?

There are a few things you can check if your pool cleaner is not working.

First, check that the vacuum line is connected to the skimmer correctly. If it isn’t, the skimmer won’t be able to make enough pressure to pull water into the pump.

Second, Check the basket in the skimmer. If there is too much dirt, trash, or algae in the basket, the skimmer will not work right.

Lastly, check the float valve on the skimmer. The water level in the skimmer can be controlled by the float valve, which is a small device. If the float valve isn’t working right, the water level in the skimmer may be too low. If that happens, the skimmer won’t be able to pull in enough water.

Now we will know some FAQs

FAQs On How to connect pool vacuum hose to a skimmer

What Happens If the Pool Vacuum Hose Doesn’t Fit Skimmer?

You can try using an adapter if the pool cleaner hose doesn’t fit the skimmer. An adapter is a piece of equipment that lets you join together two different kinds of vacuum hoses.

Why is there air in my pool vacuum hose?

Air in the pool vacuum hose can be due to loose connections or a damaged hose. Check all the connections and fix or replace anything that is broken.

Which hole to cover in a pool skimmer?

Most of the time, you don’t stop any holes in a pool skimmer for good. The hole in the middle of the skimmer lets water into the pool to clean it. But there could be other holes for things like cleaning or getting ready for winter. It would help if you patched up some holes for now. Follow the directions to know which spots to cover and which to leave open.

Do you remove the skimmer basket when vacuuming?

When you clean your pool, taking out the skimmer basket is a good idea. Things like leaves fit in the basket. But when you tend, you want all the dirt to be picked up by the cleaner. When you take out the basket, the vacuum works better.

Video On How To Connect Pool Vacuum Hose To Skimmer

Finally, we are going to the conclusion on how to Connect Pool Vacuum Hose To Skimmer


To keep your pool clean, connecting the vacuum hose to the skimmer is important. Following the steps in this guide, you can clean your pool well, whether above or in the ground.

Just get the tools you need, turn off the pool pump, and put the vacuum plate and hose in the right place. This will stop problems like the sock getting full of air or not fitting right. You could fix your pool skimmer if you knew why it does not work and how different skimmer setups work.

With this help, connecting the vacuum line to the skimmer should be easy. To have a clean pool all season, it’s essential to do regular upkeep, like cleaning. Check out our F.A.Q. for more help if you have more questions. By getting good at this process, you can ensure your pool is always an excellent place to swim.

3 thoughts on “How To Connect Pool Vacuum Hose To Skimmer – Master Guide”

Leave a Comment